Behind the Walls Valves in Building Systems

Valves are gaining more relevance in the human dynamics settlement as yesterday simple communities grow to become modern high utility demanding society. High-rising buildings and complex city networks of pipelines providing a varied collection of essential services all needing valves to efficiently deliver their content to various destinations for different purposes.

Today’s buildings use and move different types of fluids and gases through a complex piping system such as HVAC, water, and wastewater, fire protection activities. Valves play a pivotal role in sustaining the continued flow of the fluid control system. Commercial buildings surround us which requires that we pay more attention to how they are constructed. We need to know kp-lok.com how such intricate system that serves essential daily needs is managed and be reassured of safety.

Water is central and common to all buildings as all rented apartments and buildings have piping systems moving combinations of the hydrogen/oxygen compound in the form of potable water, hot water, wastewater, grey water and fire protection.

You should care and be concerned about the type of water shutoff valve used in your building to guarantee you are safe. Use of the wrong valve type may leave you vulnerable to flooding, water leakages, pipe blockages, and low water volume. Using the correct type of valves guarantee reliability and safety as the water and other services flow around your building.

Behind the Walls Valves in Building Systems

Commonly used valves for water delivery in buildings

The following variety of main water valves are used in building piping construction according to design and quality. They come in different design and styles and a variety of sizes. If Valves for water are installed using the improper form or size, it can be a code violation, pose a fire hazard, or result in a decrease in the supply of water to a building.

Gate Valve

Gate type valves operate by raising and lowering a gate inside the valve body when a handle turns the stem of the valve. Turning clockwise closes the valve, turning counter-clockwise opens the valve. The gate seats inside the valve body to make a watertight seal.

Ball Valves

A ball valve has a metal ball with a hole through the middle. When you turned open the valve, and it aligns with the pipe, this aligns the shaft in the ball with the sides of the pipe thus opens it to allow water flow through. The valve is closed if the handle is at a 90-degree angle to the pipe with the hole to the side of the pipe, so the flow of water is blocked.

Globe Valves

The globe is a stop valve. The inside is a baffle that allows water to pass over through the pipe. The baffle has a stopper above that when lowered seals the battle to stop water going through it. Opening and closing are by raising and lowering the stopper through the turning of the wheel.

Diaphragm Valves

This is a water shutoff valve and a rubber diaphragm with a stem above it. The open and close is by turning the valve wheel to lower the stem and depress the diaphragm. The action of turning lifts or depresses the diaphragm to open and close the water.

Posted by Major Joyner

Copyright © 2018 | 2014 Christian Louboutin All Rights Reserved